SonicWall Setup 2019 (Copy) | Process Street SonicWall Setup 2019 (Copy) – Process Street

In-Store Setup

  • 1
    Set your NIC to IP: 192.168.168.20 Subnet Mask: 255.255.255.0
  • 2
    Hook up an Ethernet cable between your computer and the LAN port on the SonicWall
  • 3
    Open a web browser and put 192.168.168.168 in the address bar and confirm the security exception
  • 4
    Default Credentials: admin/password
  • 5
    Change the Admin password following the criteria in the business inventory and re-log
  • 6
    Change the X0 LAN IP to 192.168.1.2
  • 7
    Set your NIC to IP: 192.168.1.x Subnet Mask: 255.255.255.0
  • 8
    Open a web browser and put 192.168.1.2 in the address bar and confirm the security exception
  • 9
    Verify the new IP and password still work before logging out

On-Site Setup

  • 1
    Plug Comcast/Verizon into the X1 WAN port (Configure with Public IP info)
  • 2
    Plug the Switch into the X0 LAN port (Configure with 192.x address)
  • 3
    Plug the Server into the Switch
  • 4
    Test the Internet, if it's not working, disable/re-enable the NIC
  • 5
    Test Internet the on the Server
  • 6
    Test Internet on multiple users' computers via Ethernet and Wi-Fi
  • 7
    User the following link to set up Remote Management for the SonicWall
  • 8
    https://www.sonicwall.com/support/knowledge-base/170505449785599/
  • 9
    Register the SonicWall (System --> Licenses)
  • 10
    Click Register, enter [email protected] and pw: In CBI
  • 11
    Under License Management, click on Upgrade to add the SSL VPN license activation key
  • 12
    Add VPN users by performing the steps in the following link
  • 13
    http://help.sonicwall.com/help/sw/eng/9600/26/2/3/content/SSL_VPN.090.3.htm
  • 14
    Add to the CBI
  • 15
    Pick "LAN Subnets" for the VPN Client Access Networks tab
  • 16
    Add this Address Object: SSL VPN Pool with this range: EXAMPLE: 192.168.168.101-192.168.1.106 using the instructions in the following link
  • 17
    https://www.sonicwall.com/en-us/support/knowledge-base/170505401898786
  • 18
    Network --> Address Objects, Add
  • 19
    SSL VPN pool, range, EXAMPLE: 192.168.168.101-192.168.168.106
  • 20
    SSL VPN, Server Settings, click WAN and LAN to turn them on (Green)
  • 21
    SSL VPN, client settings, click configure on default device profile, SSL VPN is the zone. Enter the server's IP for DNS, Create Client Connection Profile enabled
  • 22
    Test the VPN from a mobile hot-spot
  • 23
    Make sure all users have Local AD accounts to access local subnet resources
  • 24
    Remote setup of Netextender or provide SOP