Product
Solutions
Resources

What is Muda? 7 Wastes All Lean Businesses Must Overcome

muda what is muda

One of the key parts of driving your business forward is being able to identify and tackle muda.

Is a process taking too long? Is it creating a bottleneck? Are your workers struggling to be productive?

In this Process Street article, we look again at what managers can learn from the Toyota Production System about how to improve your business processes.

The specific concept we’re tackling is muda. Muda translates roughly as waste, and refers to the inefficiencies within processes which you can seek to reduce or eliminate entirely.

As Rene T. Domingo outlines in his paper Identifying and Eliminating The Seven Wastes or Muda for the Asian Institute of Management:

The elimination of waste is the primary goal of any lean system. In effect, lean declares war on waste – any waste. Waste or muda is anything that does not have value or does not add value. Waste is something the customer will not pay for.

We’ll look at the core 7 types of waste Toyota see within processes and production systems and consider the claims for the addition of an eighth.

The 7 forms of muda:

  • Waste of overproduction (largest waste)
  • Waste of time on hand (waiting)
  • Waste of transportation
  • Waste of processing itself
  • Waste of stock at hand
  • Waste of movement
  • Waste of making defective products

Muda must be identified in order to be eliminated

The two key forms of wastes are obvious wastes and hidden wastes.

Domingo claims that hidden wastes are often the most dangerous wastes. His position is that hidden wastes are not addressed, even in small ways, which allows them to grow and results in hidden wastes being larger than obvious ones.

Domingo compares hidden wastes to an iceberg; once you spot the tip you should know that there’s a greater body hidden under the surface.

The primary steps he lists in tackling waste are:

  1. Make waste visible.
  2. Be conscious of the waste.
  3. Be accountable for the waste.
  4. Measure the waste.
  5. Eliminate or reduce the waste

These simple steps rely on awareness, discussion, and accountability as much as they rely on analysis or action.

As we’ve covered before, normalization of deviance can seep into a company and eat away at its effectiveness and output. One of the core motivators of normalization of deviance is an unwillingness to be self-critical in the way you approach you business operations; relying on techniques you’ve come to accept as normal within the company, whether or not they are beneficial for the company.

This point is reiterated in our post on how a hedge fund works where we discussed Bridgewater Associates’ founder and CEO Ray Dalio’s insistence that employees should take responsibility for their successes and failures. He promotes concepts like radical truth and radical transparency in order to encourage a company culture of critique and internal analysis.

We expand on this further and provide an actionable series of steps you can take to improve company processes in our template Ray Dalio’s Process Improvement Method.

Once you have identified and measured the waste then you can see the reasonable steps to take to combat it.

7 wastes or 8? The argument for Downtime

muda 7 wastes

Muda is not an entirely independent concept. It coexists with mura and muri.

Muri translates to overload or burden. It refers to working something beyond capacity; whether that is equipment in a factory, or your labor force. Working something beyond capacity can lead to decline of output over time or even a sudden shutdown. Depending on your industry and the nature of the processes in place, this can prove catastrophic.

Mura translates as unevenness. You can think of muri as being one of the key causes of bottlenecks; one process in a production system fails to reach the output of the others, resulting in provoking waste in the other processes as they are not able to reach their maximum or optimum output.

Mura and muri are not wastes explicitly but they can be catalysts for further waste or future waste. As Domingo outlines:

 In a way, mura and muri also cause wastes but in a particular way.

It’s as a result of the recognition of muri and mura and other variables that many firms have attempted to incorporate other wastes into the list of core muda.

One particularly effective approach which has been taken up across the industry is Downtime.

Downtime is advocated for by The McDonald Consulting Group in their article What are the 7 wastes in Lean? 

They show how the addition of a further muda can create the mnemonic Downtime:

  • Defective Production,
  • Overproduction,
  • Waiting,
  • Non-used Employee Talent (the 8th form),
  • Transportation,
  • Inventory,
  • Motion, and
  • Excessive (Over) Processing

Other 8th candidates have been proposed but considering the need for an increase in productivity output across many western nations, it seems that non-used Employee Talent is a good suggestion to add to the list.

The difference between post-downturn productivity performance and the pre-downturn trend across the G7 in 2015 averaged 7.5% according to a 2017 ONS report International comparisons of UK productivity (ICP), final estimates: 2015. So further growth would certainly benefit from utilizing approaches and software which can increase the value of a worker’s output.

According to the report Four Fundamentals of Workplace Automation from McKinsey, 15% of the average marketing executive’s time can be automated with existing commercially available technologies. If we free up our workers from repetitive tasks like data entry then they can focus on the highest value tasks which increase their personal contribution to the company.

If you want to read more about how you can utilize automation technologies in your business, it’s a good idea to download our free ebook Ultimate Guide to Business Process Automation.

We’ve included the waste of underutilized workers as one of our core wastes within this article, as we feel companies can do a great deal more to unleash the talents of their existing workforce and boost productivity company-wide.

Muda 1: Waste of overproduction (largest waste)

Overproduction waste is often overlooked by companies who see extra stock as being an asset rather than a liability. However, the costs of running machinery or services above the rate of production can be a hidden waste these companies may not consider. Combined with the extra costs of holding excessive stock or being unable to sell extra stock after a certain period, this can create further wastes for a business.

What is it?

  • Producing more than what is needed
  • Producing at a faster rate than is needed
  • Holding on to excessive inventory

What causes it?

  • High capacity equipment above the needs of production
  • Poor production planning, mapping, and scheduling
  • Inappropriate use of incentivization focusing workers on the wrong tasks

How do we fix it?

  • Just-in-time production systems create products at the rate they are needed
  • Pull systems in production can be used to tailor production to meet demand
  • More accurate sales projections can reduce overly-high targets and rebalance production priorities

Muda 2: Waste of time on hand (waiting)

Waiting occurs in all businesses and can be as simple as being late for meetings. In an industrial setting, the problem may be a result of material issues such as damaged machinery or delayed raw materials. In these environments it is important to analyze the cost of the waste and calculate how long it would take for a capital injection into new equipment to pay off.

What is it?

  • Time spent where workers are idle
  • Time spent where machinery is idle
  • Dead time where projects stall and budgets spiral

What causes it?

  • Unsynchronized processes and line imbalances
  • Overstaffing, understaffing, or poor allocation of labor across a project
  • Unscheduled machine downtime or shortage of raw materials

How do we fix it?

  • Process mapping and BPMN techniques allow managers to see an overview of entire flows
  • Increased communication with suppliers or deliveries to combat downtime
  • Flexible labor force capable of taking on responsibilities across different company areas

Muda 3: Waste of transportation

Businesses are full of moving parts. These parts could be equipment, products, workers, or documents. A simple example of reduced movement applicable to any business would be the use of cloud based document signing systems. This allows people to sign contracts or sign off on reports without posting, delivering, printing, or scanning. Simply view the document and tap to sign digitally. You can use services like DocuSign or Process Street’s Inbox and assigned tasks to overcome problems in the movement of documents and in review processes.

What is it?

  • Unnecessary movement of products from production to sale
  • Unnecessary movement of materials or products in the production process
  • Unnecessary movement of tools or equipment in the production process

What causes it?

  • Poor route planning and distant suppliers or customers
  • Unnecessarily complex material flows or production processes
  • Disorganized workplaces which fail to minimize transit distances or expense

How do we fix it?

  • Moving aspects of production to be localized, possibly as part of increased vertical integration
  • Mapping transport flows in the production process and seeking to streamline and standardize these patterns
  • Increased digitization or paperwork reduction to decrease movement in business processes

Muda 4: Waste of processing itself

A constant search for product perfection can sometimes lead to a product being over-processed. This often comes from a misunderstanding of why customers buy your product, and what looks better to the product designer might look worse to the customer if the necessary market research and customer satisfaction data isn’t present. The need to define quality in business terms is the core concept in William Edward Deming’s theory of business; a position I argue in a previous article on The Deming Cycle. Failing to grasp the customer’s conception of quality may lead to over-processing a product or service.

What is it?

  • Non-value added processing by labor
  • Non-value added processing by machinery
  • Creating unnecessary quality or depth beyond the customer need

What causes it?

  • Unclear understanding of customer product satisfaction
  • Excessive focus on refinements and detail
  • Frequent engineering changes and unclear or poorly documented work instructions

How do we fix it?

  • Value stream analysis, also known as information-flow mapping
  • Waterfall diagrams help companies measure the cumulative effect of sequential variables
  • Streamlining standard operating procedures to reduce overall volume of documentation

Muda 5: Waste of stock at hand

Holding too much inventory can slow down a business and create problems in storage. This form of waste may be down to overproduction – if it is, the solution is to tackle that waste and see the stock waste decline in turn. However, this depends on each business. Certain products may be valuable to a business but be sold in lower quantities, creating the space for variable demand. In this instance it may be more expensive to have a stop-start production system, than to hold excessive stock generated through a continuous flow. Only by identifying, measuring, and analyzing this waste can the right solution for your business be determined.

What is it?

  • Possessing excessive amounts of inventory
  • Possessing excessive amounts of raw materials or equipment
  • Often the direct result of overproduction

What causes it?

  • Overproduction; in many cases down to line imbalances or large batch sizes
  • Poor sales or distribution performances, often connected to large minimum purchase standards
  • Misunderstanding the market need or overestimating future business performance

How do we fix it?

  • Tackle waste of overproduction if it is seen to be the underlying cause
  • Reassess production targets in order to better meet demand
  • Analyze the production rates of slow-moving stock with variable demand

Waste of movement

The most obvious forms of wasted movement involve poorly organized factories or service assemblies where workers need to walk around the space to gather equipment or tools to complete their tasks. However, waste of movement can be even more niche than this. Imagine a worker at a fixed station on an assembly line who needs to use three different tools each day. If this worker needs to bend down for one of these tools each time, then this may slow the process; even only slightly. Moreover, after half a day of bending down for this tool the worker could be tired or feel sore – reducing their output or engagement with the task.

In a bar environment, you may see speed-rails where the most popular spirits are kept at the front of the bar, just out of sight of the customer. When the customer asks for a drink, the bartender does not need to turn around and find the spirit, they simply pull out the bottle which is already in front of them and pour. This small change reduces the time it takes to serve each drink significantly, raising the bartender’s productivity. In a quiet bar this would go unnoticed, but in a busy nightclub it could drastically increase sales.

What is it?

  • Excessive movement by workers in the production process
  • The human element of production flows

What causes it?

  • Poorly designed production facilities
  • Non-standardized production processes
  • Unclear flows of materials, down to either poor operational management or poor training

How do we fix it?

  • Assembly lines can minimize worker movements
  • Clear categorization and availability of needed tools or equipment
  • Effective training procedures and easily accessible and actionable standard operating procedures

Muda 6: Waste of making defective products

Anyone involved in the manufacturing of physical products knows about the ongoing battle against defects. The world of Six Sigma is built around the idea that reducing defects is a hugely important route to improving quality. When operating at scale, small percentage decreases of defective output can result in large financial gains. However, it is not only industrial and manufacturing sectors which benefit from viewing their business output from the perspective of defects. In other industries it is possible to identify common defects in output and design a process which highlights the need for further inspection into these common defects before delivery, or during the task itself.

What is it?

  • Wasted processing efforts on defective products
  • Wasted materials on defective products
  • Wasted processing on attempts to rework or repair defective products

What causes it?

  • Poor management of the production processes
  • Inadequate suppliers or third party production elements
  • Unclear specifications and poor manufacturing documentation

How do we fix it?

  • Avoid segmenting quality control departmentally; quality control can benefit from a holistic perspective
  • Use techniques like the DMAIC process and other Six Sigma methodologies to tackle defects
  • Make sure workers are appropriately trained and standardized processes are being adequately followed

Muda 7: Waste of underutilized workers

This final waste is not one of the classics, but I support the call from McDonald Consulting Group and others to add it to the list.

Increasingly in Western nations we have high skilled individuals with significant training undertaking tasks which a machine could do. Those staff could be focusing on the high-value tasks which they want to do, can do, and contribute most to the business. Beyond this, it benefits to involve process users in the creation of processes as they are able to provide valuable insight into the day to day use of a process; particularly useful in process optimization.

Workers who feel like they have ownership over the processes they use are likely to engage with those processes more and provide better output.

What is it?

  • Not applying a worker’s talent or abilities effectively
  • Not benefiting from the collective knowledge of a team
  • Wasting skilled labor hours on tasks which could reasonably be automated

What causes it?

  • Poor company communication and consultation with staff
  • Overly bureaucratic hierarchies which impose standards or techniques on teams which could give valuable input
  • The failure to utilize simple technological solutions to reduce data entry and other low-skill labor-intensive tasks

How do we fix it?

  • Involve process users in the design stages of process documentation
  • Provide internal process-facing staff who can work across different departments or organizational layers
  • Utilize available automation technologies; more can be found in our ebook: Ultimate Guide to Business Process Automation

Stuck in the muda; don’t let waste bog you down

Now you’ve seen the breakdown of the different forms of waste which a business could look to tackle, it is useful to think about how exactly we’re going to tackle it.

Below are two great videos.

The first is from New York and shows Toyota’s consulting arm entering into the world’s largest foodbank and helping reduce waste and increase output by streamlining the different flows in the organization. You can read more about these efforts in our post on process implementation.

This second video is from the McDonald’s film The Founder and depicts the McDonald brothers coming up with their industry changing Speedee Service System. You can check out more about the fast food revolution on our post about how franchises work.

With Process Street, you can begin to tackle the:

  • Poor flows in your company processes
  • Undocumented processes causing chaos in your operations
  • Non-standardized processes which stop you from optimizing
  • Waste of uncertainty, through task assignments and notifications in Process Street’s Inbox

Process Street seeks to bring order and clarity to business operations.

Once processes are documented they are much easier to analyze. This allows you to identify waste more efficiently and to use Process Street’s system to tackle many wastes when they arise.

For a really simple overview of the basics of how Process Street works, check out this 1 minute video below!

Throughout this article, we’ve covered almost every type of waste you may experience in your business operations.

Ironically, this doesn’t include the blindingly obvious material waste and environmental impact; something every company should be aware of and work to minimize. But we can look at that more in an upcoming article.

Reduce your waste and boost your business, and let Process Street help you along the way.

How have you worked to combat waste in your business? What challenges did you face? Let us know in the comments below!

Get our posts & product updates earlier by simply subscribing

Adam Henshall

I manage the content for Process Street and dabble in other projects inc language exchange app Idyoma on the side. Living in Sevilla in the south of Spain, my current hobby is learning Spanish! @adam_h_h on Twitter. Subscribe to my email newsletter here on Substack: Trust The Process. Or come join the conversation on Reddit at r/ProcessManagement.

Leave a Reply

Your email address will not be published. Required fields are marked *

Take control of your workflows today