{"id":11498,"date":"2017-07-03T06:50:32","date_gmt":"2017-07-03T06:50:32","guid":{"rendered":"https:\/\/www.process.st\/templates\/dido-pass-copy\/"},"modified":"2024-02-28T20:45:56","modified_gmt":"2024-02-28T20:45:56","slug":"dido-pass-copy","status":"publish","type":"post","link":"https:\/\/www.process.st\/templates\/dido-pass-copy\/","title":{"rendered":"DIDO Pass (Copy)"},"content":{"rendered":"
\n

Series Start [30 minutes before first pass]: <\/h2>\n<\/section>\n
\n

Get latest TLE <\/h2>\n<\/section>\n
\n

Close and reopen the VU Transceiver <\/h2>\n<\/section>\n
\n

Make sure the rotors were recently calibrated <\/h2>\n
\n
\n <\/a>
\n <\/figure>\n<\/p><\/div>\n
\n

The red bigger red circle in the image indicates were you can find the calibration time, if the time is more then 12 hours ago, calibrate the rotor by pressing calibrate.<\/p>\n<\/p><\/div>\n<\/section>\n

\n

Observe the state of the satellite on the Status, Passes tabs <\/h2>\n<\/section>\n
\n

Pre Pass #1: <\/h2>\n<\/section>\n
\n

Observe last state of the Telemetry Viewer <\/h2>\n<\/section>\n
\n

Create pass plan: TLE (once per series), Min\/Max, coarse WODs.. <\/h2>\n<\/section>\n
\n

Post Pass #1: <\/h2>\n<\/section>\n
\n

Status tab \u2023 Update file handles, WOD info <\/h2>\n<\/section>\n
\n

Status tab \u2023 Update paramsDB \/ flight params that were changed <\/h2>\n<\/section>\n
\n

Files tab \u2023 Update uplinked \/ downlinked files <\/h2>\n<\/section>\n
\n

Passes tab \u2023 Describe the lastest pass <\/h2>\n<\/section>\n
\n

Check that the temperature is not fixed <\/h2>\n<\/section>\n
\n

Pre Pass #2: <\/h2>\n<\/section>\n
\n

Observe last state of the Telemetry Viewer <\/h2>\n<\/section>\n
\n

Create pass plan: TLE (once per series), Min\/Max, coarse WODs.. <\/h2>\n<\/section>\n
\n

Post Pass #2: <\/h2>\n<\/section>\n
\n

Status tab \u2023 Update file handles, WOD info <\/h2>\n<\/section>\n
\n

Status tab \u2023 Update paramsDB \/ flight params that were changed <\/h2>\n<\/section>\n
\n

Files tab \u2023 Update uplinked \/ downlinked files <\/h2>\n<\/section>\n
\n

Passes tab \u2023 Describe the lastest pass <\/h2>\n<\/section>\n
\n

Check that the temperature is not fixed <\/h2>\n<\/section>\n
\n

Pre Pass #3: <\/h2>\n<\/section>\n
\n

Observe last state of the Telemetry Viewer <\/h2>\n<\/section>\n
\n

Create pass plan: TLE (once per series), Min\/Max, coarse WODs.. <\/h2>\n<\/section>\n
\n

Post Pass #3: <\/h2>\n<\/section>\n
\n

Status tab \u2023 Update file handles, WOD info <\/h2>\n<\/section>\n
\n

Status tab \u2023 Update paramsDB \/ flight params that were changed <\/h2>\n<\/section>\n
\n

Files tab \u2023 Update uplinked \/ downlinked files <\/h2>\n<\/section>\n
\n

Passes tab \u2023 Describe the lastest pass <\/h2>\n<\/section>\n
\n

Check that the temperature is not fixed <\/h2>\n<\/section>\n
\n

Post Series: <\/h2>\n<\/section>\n
\n

Status tab \u2023 Update latest TLE age <\/h2>\n<\/section>\n
\n

Sync downlinked files to backend [optional] <\/h2>\n<\/section>\n
\n

When applicable, add TODO for the next series <\/h2>\n<\/section>\n
\n

Weekly operation (Every Thursday morning): <\/h2>\n<\/section>\n
\n

Update the TLE in the LGS controller <\/h2>\n
\n

Open a terminal:<\/p>\n

run the following commands:<\/p>\n

1. ps -eaf | grep lgs_server and get the process id for the process<\/p>\n

2. su (password is isis)<\/p>\n

3. kill -9 <process id><\/p>\n

4. \/etc\/init.d\/lgs_server restart<\/p>\n

5. (optional) You can check the log of the lgs_server with  the following command - <\/p>\n

less +G \/home\/lgs\/.isis\/lgs\/lgs.log<\/p>\n<\/p><\/div>\n<\/section>\n

\n

Update the Debian software <\/h2>\n
\n

Open a terminal and run the following commands:<\/p>\n

apt-get update
apt-get upgrade<\/p>\n

Otherwise, if as seen in the red small cycle, we can update it if there is a popup as well<\/p>\n<\/p><\/div>\n

\n
\n <\/a>
\n <\/figure>\n<\/p><\/div>\n<\/section>\n","protected":false},"excerpt":{"rendered":"

Series Start [30 minutes before first pass]: Get latest TLE Close and reopen the VU Transceiver Make sure the rotors were recently calibrated The red bigger red circle in the image indicates were you can find the calibration time, if the time is more then 12 hours ago, calibrate the rotor by pressing calibrate. Observe the […]<\/p>\n","protected":false},"author":3,"featured_media":11499,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"ep_exclude_from_search":false,"cover_icon_emoji":"","cover_icon_url":"","tasks_count":"39","template_description":"","template_id":"kKA2QiVHCEfMOKWTwDRMZw","task_0":"Series Start [30 minutes before first pass]:","task_slug_0":"series-start-30-minutes-before-first-pass","task_1":"Get latest TLE","task_slug_1":"get-latest-tle","task_2":"Close and reopen the VU Transceiver","task_slug_2":"close-and-reopen-the-vu-transceiver","task_3":"Make sure the rotors were recently calibrated","task_slug_3":"make-sure-the-rotors-were-recently-calibrated","task_4":"Observe the state of the satellite on the Status, Passes tabs","task_slug_4":"observe-the-state-of-the-satellite-on-the-status-passes-tabs","task_5":"Pre Pass #1:","task_slug_5":"pre-pass-1","task_6":"Observe last state of the Telemetry Viewer","task_slug_6":"observe-last-state-of-the-telemetry-viewer","task_7":"Create pass plan: TLE (once per series), Min\/Max, coarse WODs..","task_slug_7":"create-pass-plan-tle-once-per-series-minmax-coarse-wods","task_8":"Post Pass #1:","task_slug_8":"post-pass-1","task_9":"Status tab \u2023 Update file handles, WOD info","task_slug_9":"status-tab--update-file-handles-wod-info","task_10":"Status tab \u2023 Update paramsDB \/ flight params that were changed","task_slug_10":"status-tab--update-paramsdb--flight-params-that-were-changed","task_11":"Files tab \u2023 Update uplinked \/ downlinked files","task_slug_11":"files-tab--update-uplinked--downlinked-files","task_12":"Passes tab \u2023 Describe the lastest pass","task_slug_12":"passes-tab--describe-the-lastest-pass","task_13":"Check that the temperature is not fixed","task_slug_13":"check-that-the-temperature-is-not-fixed","task_14":"Pre Pass #2:","task_slug_14":"pre-pass-2","task_15":"Observe last state of the Telemetry Viewer","task_slug_15":"observe-last-state-of-the-telemetry-viewer-2","task_16":"Create pass plan: TLE (once per series), Min\/Max, coarse WODs..","task_slug_16":"create-pass-plan-tle-once-per-series-minmax-coarse-wods-2","task_17":"Post Pass #2:","task_slug_17":"post-pass-2","task_18":"Status tab \u2023 Update file handles, WOD info","task_slug_18":"status-tab--update-file-handles-wod-info-2","task_19":"Status tab \u2023 Update paramsDB \/ flight params that were changed","task_slug_19":"status-tab--update-paramsdb--flight-params-that-were-changed-2","task_20":"Files tab \u2023 Update uplinked \/ downlinked files","task_slug_20":"files-tab--update-uplinked--downlinked-files-2","task_21":"Passes tab \u2023 Describe the lastest pass","task_slug_21":"passes-tab--describe-the-lastest-pass-2","task_22":"Check that the temperature is not fixed","task_slug_22":"check-that-the-temperature-is-not-fixed-2","task_23":"Pre Pass #3:","task_slug_23":"pre-pass-3","task_24":"Observe last state of the Telemetry Viewer","task_slug_24":"observe-last-state-of-the-telemetry-viewer-3","task_25":"Create pass plan: TLE (once per series), Min\/Max, coarse WODs..","task_slug_25":"create-pass-plan-tle-once-per-series-minmax-coarse-wods-3","task_26":"Post Pass #3:","task_slug_26":"post-pass-3","task_27":"Status tab \u2023 Update file handles, WOD info","task_slug_27":"status-tab--update-file-handles-wod-info-3","task_28":"Status tab \u2023 Update paramsDB \/ flight params that were changed","task_slug_28":"status-tab--update-paramsdb--flight-params-that-were-changed-3","task_29":"Files tab \u2023 Update uplinked \/ downlinked files","task_slug_29":"files-tab--update-uplinked--downlinked-files-3","task_30":"Passes tab \u2023 Describe the lastest pass","task_slug_30":"passes-tab--describe-the-lastest-pass-3","task_31":"Check that the temperature is not fixed","task_slug_31":"check-that-the-temperature-is-not-fixed-3","task_32":"Post Series:","task_slug_32":"post-series","task_33":"Status tab \u2023 Update latest TLE age","task_slug_33":"status-tab--update-latest-tle-age","task_34":"Sync downlinked files to backend [optional]","task_slug_34":"sync-downlinked-files-to-backend-optional","task_35":"When applicable, add TODO for the next series","task_slug_35":"when-applicable-add-todo-for-the-next-series","task_36":"Weekly operation (Every Thursday morning):","task_slug_36":"weekly-operation-every-thursday-morning","task_37":"Update the TLE in the LGS controller","task_slug_37":"update-the-tle-in-the-lgs-controller","task_38":"Update the Debian software","task_slug_38":"update-the-debian-software","task_39":"","task_slug_39":"","task_40":"","task_slug_40":"","task_41":"","task_slug_41":"","task_42":"","task_slug_42":"","task_43":"","task_slug_43":"","task_44":"","task_slug_44":"","task_45":"","task_slug_45":"","task_46":"","task_slug_46":"","task_47":"","task_slug_47":"","task_48":"","task_slug_48":"","task_49":"","task_slug_49":"","task_50":"","task_slug_50":"","task_51":"","task_slug_51":"","task_52":"","task_slug_52":"","task_53":"","task_slug_53":"","task_54":"","task_slug_54":"","task_55":"","task_slug_55":"","task_56":"","task_slug_56":"","task_57":"","task_slug_57":"","task_58":"","task_slug_58":"","task_59":"","task_slug_59":"","task_60":"","task_slug_60":"","task_61":"","task_slug_61":"","task_62":"","task_slug_62":"","task_63":"","task_slug_63":"","task_64":"","task_slug_64":"","task_65":"","task_slug_65":"","task_66":"","task_slug_66":"","task_67":"","task_slug_67":"","task_68":"","task_slug_68":"","task_69":"","task_slug_69":"","task_70":"","task_slug_70":"","task_71":"","task_slug_71":"","task_72":"","task_slug_72":"","task_73":"","task_slug_73":"","task_74":"","task_slug_74":"","task_75":"","task_slug_75":"","task_76":"","task_slug_76":"","task_77":"","task_slug_77":"","task_78":"","task_slug_78":"","task_79":"","task_slug_79":"","task_80":"","task_slug_80":"","task_81":"","task_slug_81":"","task_82":"","task_slug_82":"","task_83":"","task_slug_83":"","task_84":"","task_slug_84":"","task_85":"","task_slug_85":"","task_86":"","task_slug_86":"","task_87":"","task_slug_87":"","task_88":"","task_slug_88":"","task_89":"","task_slug_89":"","task_90":"","task_slug_90":"","task_91":"","task_slug_91":"","task_92":"","task_slug_92":"","task_93":"","task_slug_93":"","task_94":"","task_slug_94":"","task_95":"","task_slug_95":"","task_96":"","task_slug_96":"","task_97":"","task_slug_97":"","task_98":"","task_slug_98":"","task_99":"","task_slug_99":"","footnotes":""},"categories":[7,1],"tags":[],"class_list":["post-11498","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-miscellaneous","category-uncategorized"],"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/posts\/11498","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/comments?post=11498"}],"version-history":[{"count":0,"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/posts\/11498\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/media\/11499"}],"wp:attachment":[{"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/media?parent=11498"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/categories?post=11498"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.process.st\/templates\/wp-json\/wp\/v2\/tags?post=11498"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}