Construction Glass and Glazing Quality Control Checklist
🔍
Construction Glass and Glazing Quality Control Checklist
1
Inspect and verify delivery of glass and glazing materials
2
Check for visible defects including scratches, chips or cracks in the glass
3
Check glass and glazing materials for correct size and specifications
4
Approval: Glazing Materials Specification Review
5
Inspect the framing and support systems for defects and issues
6
Ensure cleanliness of the area where glass will be installed
7
Make sure the glazing compounds are in a good and usable condition
8
Install test panel for the project
9
Check the installation process, ensuring it follows the manufacturer guidelines
10
Approval: Installation Process Review
11
Check the sealants and adhesives for adequate bonding and curing
12
Inspect the edges and joints for leakage using water spraying
13
Ensure that all fixtures and accessories have been installed correctly
14
Examine the final installation for motorized or manual operation (if applicable)
15
Confirm adherence to safety regulations and code compliance
16
Approval: Safety and Compliance Review
17
Conduct a final visual inspection of the project
18
Document any issues identified and potential corrective actions
19
Approval: Final Inspection and Resolution Plan
Inspect and verify delivery of glass and glazing materials
Verify that the glass and glazing materials have been delivered as per the order specifications. This task ensures that the correct materials are available for the project, avoiding any delays or issues later on. Are all the glass and glazing materials present? Have they been delivered in good condition?
1
Excellent
2
Good
3
Average
4
Poor
5
Damaged
Check for visible defects including scratches, chips or cracks in the glass
Inspect the glass for any visible defects such as scratches, chips, or cracks. Identifying and addressing these defects before installation ensures the quality and appearance of the final project. Do you notice any defects on the glass?
1
Scratches
2
Chips
3
Cracks
4
No defects
Check glass and glazing materials for correct size and specifications
Ensure that the glass and glazing materials are of the correct size and meet the required specifications. This ensures proper fit and functionality during installation. Are the glass and glazing materials the correct size? Do they meet the specified requirements?
1
Correct size
2
Slightly off size
3
Significantly off size
Approval: Glazing Materials Specification Review
Will be submitted for approval:
Inspect and verify delivery of glass and glazing materials
Will be submitted
Check for visible defects including scratches, chips or cracks in the glass
Will be submitted
Check glass and glazing materials for correct size and specifications
Will be submitted
Inspect the framing and support systems for defects and issues
Thoroughly inspect the framing and support systems for any defects or issues that could affect the performance and durability of the glass installation. Are there any defects or issues with the framing and support systems?
1
Cracks
2
Uneven surface
3
Loose connections
4
No defects
Ensure cleanliness of the area where glass will be installed
Cleanliness of the installation area is crucial for a successful glass installation. Ensure that the area is free from dirt, debris, and any other substances that could negatively impact the adhesion and appearance of the glass. Is the installation area clean and ready for glass installation?
1
Clean
2
Slightly dirty
3
Significantly dirty
Make sure the glazing compounds are in a good and usable condition
Ensure that the glazing compounds are in good and usable condition. This ensures proper sealing and bonding of the glass. Are the glazing compounds in a good and usable condition?
1
Good condition
2
Dried out
3
Expired
4
Other
Install test panel for the project
Install a test panel to evaluate the installation process and identify any potential issues or areas for improvement. This step allows for adjustments before the final installation. Has the test panel been successfully installed?
1
Installed successfully
2
Partially installed
3
Not installed
Check the installation process, ensuring it follows the manufacturer guidelines
Verify that the installation process adheres to the manufacturer guidelines. This ensures the correct installation technique and minimizes the risk of errors or failures. Does the installation process follow the manufacturer guidelines?
1
Followed guidelines
2
Partially followed guidelines
3
Did not follow guidelines
Approval: Installation Process Review
Will be submitted for approval:
Install test panel for the project
Will be submitted
Check the installation process, ensuring it follows the manufacturer guidelines
Will be submitted
Check the sealants and adhesives for adequate bonding and curing
Inspect the sealants and adhesives used for bonding and curing. This step ensures a strong and durable bond between the glass and other materials. Are the sealants and adhesives adequately bonding and curing?
1
Satisfactory
2
Partial bonding
3
No bonding
4
Other
Inspect the edges and joints for leakage using water spraying
Examine the edges and joints of the glass installation for any signs of leakage using water spraying. This ensures that the installation is watertight and free from leaks. Do you observe any leakage from the edges and joints?
1
No leakage
2
Minor leakage
3
Significant leakage
Ensure that all fixtures and accessories have been installed correctly
Verify that all fixtures and accessories required for the glass installation have been correctly installed. This ensures proper functionality and enhances the overall appearance. Have all fixtures and accessories been installed correctly?
1
Installed correctly
2
Partially installed
3
Not installed
Examine the final installation for motorized or manual operation (if applicable)
Evaluate the final installation for motorized or manual operation, if applicable. This step ensures smooth operation and functionality of the glass. Does the final installation operate smoothly?
1
Smooth operation
2
Partial operation
3
No operation
4
Not applicable
Confirm adherence to safety regulations and code compliance
Ensure that the glass installation adheres to safety regulations and code compliance. This ensures the safety of individuals and properties. Does the installation comply with safety regulations and codes?
1
Compliant
2
Partially compliant
3
Non-compliant
Approval: Safety and Compliance Review
Will be submitted for approval:
Ensure cleanliness of the area where glass will be installed
Will be submitted
Make sure the glazing compounds are in a good and usable condition
Will be submitted
Inspect the framing and support systems for defects and issues
Will be submitted
Check the sealants and adhesives for adequate bonding and curing
Will be submitted
Inspect the edges and joints for leakage using water spraying
Will be submitted
Ensure that all fixtures and accessories have been installed correctly
Will be submitted
Examine the final installation for motorized or manual operation (if applicable)
Will be submitted
Confirm adherence to safety regulations and code compliance
Will be submitted
Conduct a final visual inspection of the project
Conduct a comprehensive visual inspection of the glass installation to check for any defects, issues, or discrepancies. This ensures a visually appealing and high-quality finished product. Are there any defects or issues observed during the final visual inspection?
1
No defects
2
Minor defects
3
Major defects
Document any issues identified and potential corrective actions
Document any issues identified during the quality control process, along with potential corrective actions to address them. This allows for proper documentation, communication, and resolution of issues. Have all identified issues and potential corrective actions been documented?
Approval: Final Inspection and Resolution Plan
Will be submitted for approval:
Conduct a final visual inspection of the project
Will be submitted
Document any issues identified and potential corrective actions