Templates
Construction
Electrical Inspection Checklist
Electrical Inspection Checklist

Electrical Inspection Checklist

Run this electrical inspection checklist before and during the inspection of a residential property.
1
Introduction to Electrical Inspection Checklist:
2
Record the details of the inspection
3
Record your inspector details
4
Inspector safety checks:
5
Are there exposed energized conductors or circuit parts?
6
Can the risk of exposure to hazards be justified?
7
What is the voltage of the equipment?
8
Where are the approach boundaries for shock protection?
9
Will the inspection involve crossing those boundaries?
10
Has an incident energy analysis been performed?
11
Do you know short-circuit current and clearing times?
12
Where is the Arc Flash Boundary?
13
Will any part of the body be within this boundary?
14
What PPE will be used for Arc Flash protection?
15
Is the appropriate PPE available?
16
Is the inspector qualified for this task and risk?
17
Fundamental residential checks:
18
Check wiring methods for support and suitability
19
Inspect cable installation
20
Check boxes for suitability for use
21
Verify that boxes are installed in suitable locations
22
Make sure cables are secured to boxes
23
Check boxes for conductor fill
24
Provide boxes are positioned correctly to be flush
25
Check splicing devices on equipment grounding conductors
26
Make sure equipment grounding conductors are suitable
27
Inspect floor and ceiling boxes for listing
28
Check recessed luminaires for clearances
29
Inspect cables in contact with thermal insulation
30
Check wall switch locations for grounded conductors
31
Provide overall notes about the inspection
32
Send inspection report
33
Sources:
34
Related Checklists: