Check underlayment for defects or improper installation
5
Inspect flashing and sealant application
6
Verify alignment and installation of roofing sheets/tiles
7
Check for proper ventilation setup
8
Ensure gutters and downspouts are correctly installed
9
Conduct water leakage test
10
Verify conformity with local building codes
11
Approval: Team Lead
12
Check cleanup and waste disposal procedures
13
Inspect for any rooftop accessories installation
14
Examine roof's structural integrity
15
Test all roof penetrations for any leakage
16
Approval: Site Supervisor
17
Compile final inspection report
18
Initiate client walkthrough
19
Approval: Client
Review project specifications and requirements
Review the project specifications and requirements to understand the scope of work. Identify any specific materials or methods that need to be followed. Consider the impact of complying with these specifications on the overall quality of the roofing project. Do you have a copy of the project specifications and requirements?
1
Yes
2
No
Inspect delivered roofing materials
Inspect the roofing materials that have been delivered to the site. Ensure that all the materials are in good condition and meet the required standards. Are all the roofing materials in good condition?
1
Yes
2
No
Measure and verify roof dimensions
Take accurate measurements of the roof dimensions using appropriate tools and techniques. Verify that the measurements are within the specified tolerances. Are the roof dimensions within the specified tolerances?
1
Yes
2
No
Check underlayment for defects or improper installation
Inspect the underlayment for any defects, such as tears or punctures, that could compromise the integrity of the roof. Also check for proper installation of the underlayment. Does the underlayment have any defects or improper installation?
1
Yes
2
No
Inspect flashing and sealant application
Inspect the flashing and sealant application to ensure they are properly installed and sealed. Check for any gaps or areas that could potentially lead to water leakage. Are the flashing and sealant properly installed and sealed?
1
Yes
2
No
Verify alignment and installation of roofing sheets/tiles
Check the alignment and installation of the roofing sheets or tiles. Verify that they are correctly installed and properly aligned. Are the roofing sheets or tiles correctly installed and aligned?
1
Yes
2
No
Check for proper ventilation setup
Inspect the ventilation setup to ensure that it meets the requirements for proper airflow and temperature regulation. Are the ventilation setup requirements met?
1
Yes
2
No
Ensure gutters and downspouts are correctly installed
Inspect the installation of gutters and downspouts to ensure they are correctly installed and properly aligned. Are the gutters and downspouts correctly installed and aligned?
1
Yes
2
No
Conduct water leakage test
Conduct a water leakage test to check if there are any leaks in the roofing system. Is there any water leakage in the roofing system?
1
Yes
2
No
Verify conformity with local building codes
Check if the roofing system complies with the local building codes and regulations. Does the roofing system comply with the local building codes and regulations?
1
Yes
2
No
Approval: Team Lead
Will be submitted for approval:
Review project specifications and requirements
Will be submitted
Inspect delivered roofing materials
Will be submitted
Measure and verify roof dimensions
Will be submitted
Check underlayment for defects or improper installation
Will be submitted
Inspect flashing and sealant application
Will be submitted
Verify alignment and installation of roofing sheets/tiles
Will be submitted
Check for proper ventilation setup
Will be submitted
Ensure gutters and downspouts are correctly installed
Will be submitted
Conduct water leakage test
Will be submitted
Verify conformity with local building codes
Will be submitted
Check cleanup and waste disposal procedures
Inspect the cleanup and waste disposal procedures to ensure that they comply with the necessary standards and regulations. Are the cleanup and waste disposal procedures compliant with the standards and regulations?
1
Yes
2
No
Inspect for any rooftop accessories installation
Inspect the installation of any rooftop accessories, such as vents or skylights, to ensure they are properly installed and sealed. Are the rooftop accessories properly installed and sealed?
1
Yes
2
No
Examine roof's structural integrity
Examine the roof's structural integrity to ensure that it is sound and capable of supporting the roofing materials. Does the roof have any structural integrity issues?
1
Yes
2
No
Test all roof penetrations for any leakage
Test all roof penetrations, such as vents or chimneys, for any signs of leakage. Are there any signs of leakage in the roof penetrations?
1
Yes
2
No
Approval: Site Supervisor
Will be submitted for approval:
Check cleanup and waste disposal procedures
Will be submitted
Inspect for any rooftop accessories installation
Will be submitted
Examine roof's structural integrity
Will be submitted
Test all roof penetrations for any leakage
Will be submitted
Compile final inspection report
Compile a final inspection report summarizing all the findings from the quality control process. Include any necessary recommendations or corrective actions. Have you compiled the final inspection report?
1
Yes
2
No
Initiate client walkthrough
Initiate a client walkthrough to review the completed roofing project and address any questions or concerns. Have you initiated the client walkthrough?
