Educate passengers about safety procedures and protocols
14
Confirm take-off and landing slots with air traffic control
15
Perform final sweep and clearance of the aircraft
16
Secure aircraft doors and control cabin
17
Approval: Final Pre-Flight Checklist
18
Give signals to ground crew for engine start
19
Taxi aircraft to the runway
20
Communicate with air traffic control for final take-off clearance
Confirm scheduled flight details
Confirm the details of the scheduled flight in a friendly tone. Explain the importance of this task to ensure a smooth and organized flight. Highlight the desired result of accurate flight details and the potential challenges that may arise if the information is incorrect. Mention the tools or resources required to perform this task.
1
Delta
2
United
3
American
4
Southwest
5
JetBlue
Perform pre-flight inspection on aircraft
Complete a pre-flight inspection on the aircraft to ensure its proper condition before the flight. Emphasize the impact of a thorough inspection on aircraft safety. Discuss the required know-how, potential challenges, and the tools or resources needed.
1
Yes
2
No
1
Wings
2
Tail
3
Engines
4
Flaps
5
Landing gear
1
Tire pressure low
2
Oil leak
3
Cracked windshield
4
Faulty landing light
5
Loose screws
Check fuel levels
Verify the fuel levels of the aircraft to ensure there is enough for the scheduled flight. Use a friendly tone to explain the importance of this task for the safety and efficiency of the flight. Discuss the know-how, potential challenges, and any tools or resources required.
1
Full
2
3/4
3
1/2
4
1/4
5
Empty
Confirm passenger and cargo manifests
Double-check the passenger and cargo manifests to ensure accurate information before the flight. Emphasize the significance of this task in terms of flight safety, compliance, and organization. Discuss any potential challenges and their remedies, as well as the tools or resources required.
Approval: Flight Plan
Will be submitted for approval:
Confirm scheduled flight details
Will be submitted
Check fuel levels
Will be submitted
Confirm passenger and cargo manifests
Will be submitted
Check navigation and communication systems
Inspect the navigation and communication systems of the aircraft to ensure they are functioning properly. Explain the impact of these systems on the flight's safety and efficiency. Highlight the know-how required, potential challenges, and any tools or resources needed.
1
GPS
2
VHF radio
3
Weather radar
4
Transponder
5
Autopilot
1
Functional
2
Requires maintenance
3
Out of order
4
Not applicable
Review weather forecasts and conditions
Review the weather forecasts and current conditions to assess their impact on the flight. Use a friendly tone to explain the importance of this task for flight safety. Discuss any required know-how, potential challenges, and the tools or resources needed to complete the task.
1
Clear
2
Partly cloudy
3
Cloudy
4
Rainy
5
Stormy
Confirm in-flight procedures
Double-check the in-flight procedures to ensure compliance and smooth operation during the flight. Explain the impact of following the procedures correctly on flight safety. Discuss any potential challenges, their remedies, and the tools or resources required.
1
Take-off
2
Climb
3
Cruise
4
Descent
5
Landing
Verify aircraft maintenance and repair logs
Verify the aircraft's maintenance and repair logs to ensure the aircraft is in a safe and well-maintained condition for the flight. Use a friendly tone to emphasize the significance of this task. Discuss any potential challenges and the tools or resources needed to complete the verification.
1
Yes
2
No
Ensure emergency equipment is functional
Check that all emergency equipment on board the aircraft is in functional condition. Explain the importance of this task in ensuring passenger and crew safety. Discuss any potential challenges, their remedies, and the tools or resources required.
1
Life vests
2
Fire extinguishers
3
Emergency exits
4
First aid kits
5
Emergency lights
1
Functional
2
Requires maintenance
3
Out of order
4
Not applicable
Check and confirm pilot credentials
Verify the credentials of the pilot to ensure they are valid and up-to-date. Explain the importance of this task in terms of flight safety and regulatory compliance. Discuss any potential challenges and the tools or resources needed to complete this task.
Approval: Safety Procedures
Will be submitted for approval:
Verify aircraft maintenance and repair logs
Will be submitted
Ensure emergency equipment is functional
Will be submitted
Check and confirm pilot credentials
Will be submitted
Educate passengers about safety procedures and protocols
Educate passengers about safety procedures and protocols before the flight. Use a friendly tone to emphasize the importance of this task in ensuring passenger safety and compliance. Discuss any challenges that may arise and the tools or resources needed for educating the passengers.
1
Seatbelt usage
2
Emergency exits
3
Oxygen masks
4
Evacuation procedures
5
Electronic devices
Confirm take-off and landing slots with air traffic control
Confirm the take-off and landing slots with air traffic control to ensure proper coordination. Explain the impact of accurate slots on flight schedule and safety. Discuss any potential challenges, their remedies, and the tools or resources needed for this task.
1
Yes
2
No
1
Yes
2
No
Perform final sweep and clearance of the aircraft
Perform a final sweep and clearance of the aircraft to ensure no objects or hazards are left behind. Explain the importance of this task in terms of passenger safety and compliance. Discuss any potential challenges and the tools or resources needed for this task.
1
Cabin
2
Cockpit
3
Overhead compartments
4
Cargo hold
5
Restrooms
Secure aircraft doors and control cabin
Secure the aircraft doors and control cabin before the flight. Use a friendly tone to emphasize the importance of this task in ensuring flight safety and security. Discuss any potential challenges and the tools or resources needed for securing the aircraft.
1
Main entry door
2
Emergency exits
3
Cockpit door
4
Cargo doors
5
Windows
Approval: Final Pre-Flight Checklist
Will be submitted for approval:
Educate passengers about safety procedures and protocols
Will be submitted
Confirm take-off and landing slots with air traffic control
Will be submitted
Perform final sweep and clearance of the aircraft
Will be submitted
Secure aircraft doors and control cabin
Will be submitted
Give signals to ground crew for engine start
Provide appropriate signals to the ground crew to initiate engine start. Explain the importance of clear communication for a smooth engine start. Discuss any potential challenges and the tools or resources needed to give the signals.
1
Yes
2
No
Taxi aircraft to the runway
Properly taxi the aircraft to the runway for take-off. Use a friendly tone to explain the importance of this task in ensuring a safe and efficient take-off. Discuss any required know-how, potential challenges, and the tools or resources needed for taxiing.
1
Left
2
Right
3
Straight
4
Follow ground crew instructions
Communicate with air traffic control for final take-off clearance
Establish communication with air traffic control to obtain final clearance for take-off. Emphasize the importance of accurate communication for flight safety. Discuss any potential challenges and the tools or resources needed to complete this task.