Our workflow ensures top-quality kitchen cabinet doors, focusing on material, measurements, design conformity, functionality, safety, packaging, and dispatch.
1
Check raw material quality for cabinet doors
2
Inspect cabinet door for any defects or damages
3
Measure the thickness and dimensions of the cabinet door
4
Check if all parts and accessories are available
5
Ensure the color, texture, and finish of the cabinet door matches with the design
6
Verification of cabinet door hinges and its functionality
7
Make sure the doors align correctly when closed
8
Verify the manufacturing standards and guidelines have been followed
9
Ensure cabinet door’s hardware installation is correct and functional
10
Check for any undesired noise when opening or closing the door
11
Confirm there are no sharp edges or corners that could cause injury
12
Approval: Quality Assurance Supervisor
13
Packaging of the cabinet door for delivery
14
Ensure the packaged cabinet door is marked with the correct information
15
Verification of dispatching the correct cabinet door orders
16
Ensure the dispatch area is kept clean after each dispatch
Check raw material quality for cabinet doors
Inspect the raw material used for manufacturing cabinet doors to ensure its quality. This includes checking for any defects, damages, or inconsistencies in color, texture, or finish. The raw material should meet the required standards and guidelines for making high-quality cabinet doors. Any issues or concerns should be documented and reported for further action.
1
Cracks
2
Scratches
3
Discoloration
4
Warped
1
White
2
Black
3
Brown
4
Gray
5
Other
1
Smooth
2
Textured
3
Grainy
4
Other
1
Matte
2
Glossy
3
Satin
4
Other
Inspect cabinet door for any defects or damages
Thoroughly examine the cabinet door for defects, damages, or any issues that may affect its functionality, appearance, or durability. Pay attention to the surface, edges, corners, and joints. Document any findings and report them for necessary action.
1
Cracks
2
Chips
3
Dents
4
Scratches
5
Warping
1
Minor
2
Moderate
3
Severe
Measure the thickness and dimensions of the cabinet door
Accurately measure the thickness and dimensions of the cabinet door to ensure it meets the required specifications. Use appropriate measuring tools and techniques to obtain precise measurements. Document the measurements and report any deviations from the desired dimensions.
Check if all parts and accessories are available
Ensure that all required parts and accessories for the cabinet door are present and accounted for. This includes hinges, handles, screws, and any other necessary components. Verify the quantity and quality of each item, and report any discrepancies or missing items.
1
Hinges
2
Handles
3
Screws
4
Other
1
Good
2
Damaged
3
Missing
Ensure the color, texture, and finish of the cabinet door matches with the design
Compare the color, texture, and finish of the cabinet door with the design specifications to ensure they match accurately. Pay attention to details such as color accuracy, texture consistency, and desired finish. Report any deviations or mismatches.
1
White
2
Black
3
Brown
4
Gray
5
Other
1
Smooth
2
Textured
3
Grainy
4
Other
1
Matte
2
Glossy
3
Satin
4
Other
Verification of cabinet door hinges and its functionality
Inspect and test the hinges of the cabinet door to ensure they are properly installed and functioning correctly. Open and close the door multiple times to check for smooth movement and proper alignment. Document any issues or concerns regarding the hinges.
1
Smooth movement
2
Proper alignment
3
No squeaking or noise
4
Other
Make sure the doors align correctly when closed
Verify that the cabinet doors align correctly when closed. Ensure that they fit properly within the frame and there are no visible gaps or misalignment. Adjustments may be required to achieve proper alignment. Document any issues or concerns.
1
Aligned
2
Misaligned
3
Gaps
4
Other
1
Yes
2
No
Verify the manufacturing standards and guidelines have been followed
Review the manufacturing process and verify that the established standards and guidelines have been followed during the production of the cabinet door. This includes checking for adherence to quality control procedures, safety regulations, and industry best practices. Document any deviations or non-compliance.
1
Quality control procedures
2
Safety regulations
3
Industry best practices
4
Other
Ensure cabinet door’s hardware installation is correct and functional
Inspect and verify that the hardware installation on the cabinet door is correct and functional. This includes hinges, handles, and any other hardware components. Test the functionality of each hardware item and ensure they are securely attached. Document any issues or concerns.
1
Hinges
2
Handles
3
Other
1
Working properly
2
Loose or not secure
3
Not functional
4
Other
Check for any undesired noise when opening or closing the door
Open and close the cabinet door multiple times to check for any undesired noise or sounds. The door should open and close quietly without any squeaking, grinding, or other unusual noise. Document any noise or sound issues for further investigation.
1
Quiet
2
Squeaking
3
Grinding
4
Other
Confirm there are no sharp edges or corners that could cause injury
Carefully inspect all edges and corners of the cabinet door to ensure there are no sharp or rough areas that could potentially cause injury. Smooth out any sharp edges or corners to make them safe. Document and address any safety concerns.
1
Smooth
2
Sharp
3
Rough
4
Other
Approval: Quality Assurance Supervisor
Will be submitted for approval:
Check raw material quality for cabinet doors
Will be submitted
Inspect cabinet door for any defects or damages
Will be submitted
Measure the thickness and dimensions of the cabinet door
Will be submitted
Check if all parts and accessories are available
Will be submitted
Ensure the color, texture, and finish of the cabinet door matches with the design
Will be submitted
Verification of cabinet door hinges and its functionality
Will be submitted
Make sure the doors align correctly when closed
Will be submitted
Verify the manufacturing standards and guidelines have been followed
Will be submitted
Ensure cabinet door’s hardware installation is correct and functional
Will be submitted
Check for any undesired noise when opening or closing the door
Will be submitted
Confirm there are no sharp edges or corners that could cause injury
Will be submitted
Packaging of the cabinet door for delivery
Properly package the cabinet door for safe transportation and delivery. This includes using appropriate packaging materials, such as bubble wrap or foam, to protect the door from scratches, dents, or other damages. Make sure the packaging is secure and labeled correctly for easy identification.
1
Bubble wrap
2
Foam
3
Cardboard
4
Other
1
Yes
2
No
Ensure the packaged cabinet door is marked with the correct information
Verify that the packaged cabinet door is labeled with the correct information, including product name, quantity, and any other relevant details. The labeling should be clear, legible, and easily readable to avoid any confusion during transportation and delivery.
Verification of dispatching the correct cabinet door orders
Double-check and verify that the correct cabinet door orders are being dispatched for delivery. Compare the order details with the packaged doors to ensure accurate fulfillment. Cross-reference the product names, quantities, and any other relevant information to confirm the correct orders are being dispatched.
1
Product name
2
Quantity
3
Customer name
4
Delivery address
1
Correct
2
Incorrect
3
Not applicable
Ensure the dispatch area is kept clean after each dispatch
Maintain cleanliness and organization in the dispatch area after each dispatch. Remove any packaging materials, waste, or debris to keep the area clean and ready for the next dispatch. Regularly inspect and clean the area to ensure a clean and efficient workflow.
